Canon iPF 101, 701 cancel ink level detection

Nov 00 0000

Canon iPF 101, 701 cancel ink level detection

CANON ® PLOTTER REFILL (CISS) SYSTEM


When the ink volume within the cartridge chip is 0%, the printer will have the signal as below.
The remaining level of the following ink cannot be correctly detected check in tank.
Check     →                           Information    ←
Press  the “→” option, to find  “Information”,there will be the words as below
   Tank once emptied is used. Stop printing due to ink level unknown. To continue,you must cancel ink level detection cancel?
No     →                     Yes   ←
Press  the“→” option to find”yes” then press”OK” key, there will be the words as below.

Avoid ink level detection after confirming that ink is in ink tank. Canon is not liable for damages due to filled tank Agree?
 No     →                     Yes   ←
Press  the “→”option ,to find “yes”then press“OK”key, there will be the words as below.

Avoid ink level detection. Perform after use of ink tank was memorized Agree?
No     →                     Yes   ←
Press the “→”option, to find“yes”then press “OK”key,wait for a while,the data within the chip will be wiped off,the  ink volume for each color will show a“?”on the front panel.
See attached image.
 

Parse Time: 0.300s